Materials needed :
- Switches
- Black and red cables 1m
- 2 batteries 1,5 V
- The battery
- Dynamo
- Blades - blades of aqua bottle
- Isolation Black
- Screwdriver (+) and (-)
How to Make :
1.Put a 1.5 V battery in the battery compartment, then cut the bottom of the bottle and forms such as aqua blades - blades, just 4 sections.
2.Wrap the copper red and black wires in the switch.
3.Other copper tacked on battery, the red wire attached to the pole (-) battery, and the black wire attached to the pole (+) battery cable first but opened, until you see the copper.
4.The cable has been connected battery is attached to the armature
5.Plug blades - blades on the dynamo.
6.Make sure all the circumstances as directed previously.
Good luck!
Tidak ada komentar:
Posting Komentar