Materials needed to make this shoe is one of the pant leg, the following tutorial:
1. Prepare palms / soles (outside) shoes. There are many types and forms of shoe soles, we can buy it in stores industrial material provider. If in Jogja, sol can be bought in store "Liman". The price varies, but last I was there the price ranging from 2 thousand per pair (including the sol layer), depending on the material and style.
2. Place the cardboard soles on paper upside down, then make a pattern corresponding sol form. Then cut out cardboard 0.5 cm larger than the pattern.
3. Scissors 2 pieces of fabric as cardboard cartridge before using the cloth pants.
4. Create a shoe head. Size can be changed according to the desired size. Incidentally my size 40 feet. The size of the head of his shoes as follows: scissors fabric and foam sheets fit the pattern above.
5. Prepare fabric (4 X 33 cm) to make elastic strap. Sewing fabric rubber tip on the end. Put the elastic band at the center of the fabric, then fold the fabric and sewing the edges (figure).
6. Sew straps on this shoe head
Then stack with foam, both part of the fabric facing each other, then sewing. Then turning, and sewing oppressed.
7. Place the head was to the fabric sol B. In order not to shift, with the needle hook. Then sewing the edges with a distance of 0.5 cm from the edge of the fabric into place flannel. Then sol A, and sewing all the edges with a distance of 0.5 cm from the edge of the incision in the middle of the fabric material.But sol A. Then behind the shoe through the hole, so that the head is outside shoes. then sewing the hole with glue. Give stitching section and the rear outer soles of shoes fabric. done starting from the edge of the center of the heel, Do it slowly and gradually so the results presentable. Make sure the seam is on the right edge of the fabric outer sole. After this, Allah willing, I plan to take it to the shoe cobbler, so sewn so much stronger.
8. Good luck.
Tidak ada komentar:
Posting Komentar