Step By Step How To Make A Toy Car Used Bottle Guide

Hardware Requirements:

- 1 piece of plastic bottles
- 4 piece crown corks (for tires)
- 2 pieces of straw
- Tape


How to:

(Adding a straw). 1.Holes bottle front and rear body

Break Part 2 of straw. Straws, an eye which had been cut in the last two bottles.

3.Turn the cap before masing2 perforated suction side.

Place 4.After crown straw. Straws and strips on a bit thick coat. End so that the tires are not easily separated.

5.Paste integral straw on the back of the car. During the processing of the car.


Best of luck!

Step By Step How To Make Wooden Toy Cars

Hardware Requirements:

- Wood


How to:

1.First prepare the ingredients.

2.Split and cut wood with a circular saw type serkel model.

3.Give shape pattern on wood.

Wooden model 4.Tack given by Jet saw chainsaw.

5.cleaning the flat surface, so that the timber with glass paper alternator.

6.Gluing one with the other wood surfaces with wood glue.

Use 7.Shape, smooth body paper alternator glass.

8.Give holes with a drill.

9.Make a wheel with a wood lathe.

10.Sublimate the surface, after all phases with a fine sandpaper finish.

11.Finishing spray by spraying the surface with a compressor melamine.


Best of luck!