Step By Step How To Make Homemade Gift Box Beautiful

Hardware Requirements:

- Rice Box (can be bought in the supermarket)
- Adhesive paper / double top
- Insulation / adhesive glue
- The wrapping paper can be replaced with a washcloth jg
- Article
- Pencil
- Knife charter
- As a band, small flowers, dolls, or something in a unique form flannel Suspended




How to:

Gift box shape, good for beginners or 1.Specify square triangle.

2.make box or model.

3.then cut the housing.

4.Shape and unite the configuration box with insulation.

5.if done? To stick a box or double top at the top of the box inside and out, and provide background information.

6.Then gently turn the gift box.

7.Give double bottom box jga edge and cover with white paper.


If the valve is substantially covered with wrapping paper and then give up beautiful decorations


Best of luck!

Step By Step How To Make A Simple Fan

Hardware Requirements:

- switch
- Black and red cable 1m
- 2 x 1.5 V
- The battery
- Dynamo
- Sheets - Sheets bottle Aqua
- Black insulation
- Screwdriver (+) and (-)



How to:

1.Put a 1.5 V battery in the battery compartment, then cut the bottom of the bottle and forms such as AQUA knives - knives, only 4 sections.

2.Wrap the son of red and black copper in the switch.

Buyer 3.Others battery nothings, the red wire to the (-) terminal of the battery and the black wire to the (+) of the battery first, but open to the buyer.

4 The battery cable is coupled, attached to the anchor member

5.Plug knife - knife on the alternator.

6.Make all conditions as previously directed.



Best of luck!

Step By Step How To Make A Wooden Bowl

Equipment and materials required:

- A fresh wood
- An ax


How to make :

1.Slit wood through the middle of the wood.

2.Select the perfect piece of wood you want. Make 2 pieces of fruit in your assessment on the handle of the bowl , as shown
in the image. Do not cut too deep. Then cut pieces that you have created on the base of the handle , before you can do to make the image of the shell. Now handle future what you want based .

3.Doing sculpture continuously until you are satisfied with the shape of your dish.

4.for timber pieces in a bowl is long enough
Thus, the strategy if you are busy, always when you cut a little time with your record Newspapers plastic to make it moist and not dry as it would make it harder for you drier Now it's time for a bowl cut you with a knife, and it may take a little time to dedicate the sculpture forms and you will soon know if you do get your hands perfectly capable of this. there

5.Place your work in an open bag for over a week , because if you do not, your chances are wooden bowl
dry quickly and the wood will last split.Hal you need to do is to stay
Grinding of the shell with sand paper starts from the rough , then smooth .


Best of luck !